LED neon sign installations are exciting, but there are some essential tools that will allow you to take full advantage of space, and they can save you your sanity. Part-life hack, part-neon sign how-to, we're here to arm you with the necessary steps needed to complete your own DIY install - all on your own. Our guide will help level up any living room, hallway or bedroom. Follow along and then go conquer your hanging to-dos just like the capable, empowered neon sign handyman or gal you are. The best part? It gives you an excuse to grab some friends and abandon the mundane!

Materials: Stud finder, level, pencil, drill, measuring tape, screwdriver, screws, drywall anchors (as needed), and hanging hardware (provided by Mondo).

1. Location:

Choose where in the room and at what height you want to hang your custom neon sign. The optimal height for neon lights on walls, like a picture or painting, is 57 inches high from the ground. Use a level for evenness.

2. Anchors

If necessary, consider using drywall anchors to provide extra structural support. Based on your custom LED signs styling (this may vary). For all contour and rectangle backing options, secure the included metal standoffs to your sign. Place the LED sign board against the wall and use a pencil to mark standoffs before inserting the screws.

3. Drill

Next up, make the necessary pilot holes with your drill. Then, carefully use a screwdriver to drill the screws into the holes naturally found inside the barrel of each individual standoff, ensuring all are flush with the wall.

4. Secure

Carefully position the custom neon lights against the wall. Secure the sign hardware to the front face of the plexi by gently tightening the inner screws by hand, paying close attention to the desired pressure needed to safely attach the sign to the wall.

5. Plug-and-play

Plug the power cord into a grounded wall outlet. Attach the cord to the neon sign transformer and check to make sure the LED signage tubing lights up.

6. Finale

And you're done. Sit, marvel, and enjoy!

Do you have any recommendations for installing custom neon signs? Share them with us on Instagram!